AUDIOENGINE A2+ BLUETOOTH HOME MUSIC SYSTEM - BLACK

Overview

Audioengine A2+ Wireless Bluetooth Speaker System

Designed to connect to virtually any device, the satin black Audioengine A2+ Wireless Bluetooth Speaker System provide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

Wireless Connectivity

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

Designed for Enhanced Bass

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits. 

Simple, Quick Setup

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

Engineered for Lower Power Consumption

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

Designed for Efficiency

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

Driver Design

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Magnetic Shielding

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

Additional Features

Specs

GENERAL SPECIFICATIONS

Type
Powered Bluetooth aptX speaker system

Amplifier Type
Class AB

Power Output
60 W peak power total (15 W RMS / 30 W peak per channel), AES

Drivers
2.75” aramid fiber woofers
0.75“ Silk dome tweeters

Inputs
3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth

Outputs
RCA variable line-out

Input Voltages
100-240 V 50/60 Hz auto-switching
SNR
>95 dB (typical A-weighted)

THD+N
<0.05% at all power settings

Crosstalk
<50 dB

Frequency Response
65 Hz-22 kHz ±2.0 dB

Input Impedence
10K ohms unbalanced

Protection
Output current limiting, thermal over-temperature, power on/off transient protection

Power Consumption
Idle: 10W

BLUETOOTH SPECIFICATIONS

Internal BT Receiver
CSR8670

Input Bit Depth
16 bit

Bluetooth Receiver Type
Bluetooth 5.0

Supported Codecs
aptX, AAC, SBC

Wireless Operation Range
Up to 100 ft (30 m) typical

Input Data Rate
Determined by Bluetooth

Wireless Latency
~30 milliseconds (ms)

USB SPECIFICATIONS

Connector Type
Micro-USB

USB Device Class
type 1.1 and above

Input Bit Depth
up to 16 bit native

Input Sample Rate
up to 48 kHz native

WEIGHTS AND MEASUREMENTS

Dimensions (HWD)
Each speaker – 6″ (15.2 cm) x 4″ (10.2 cm) x 5.25″ (13.3 cm)

Weight
Left (active) – 3.6 lb (1.6 kg)
Right (passive) – 3.2 lb (1.4 kg)

Total Shipping Weight
10 lb (4.6 kg)

Shipping Box Dimensions (LWH)
15” (38.1 cm) x 7” (17.8 cm) x 10.5” (26.7 cm)

Videos